(1) stress =AFrestoring If A=1 Stress =Frestoring (A)-(III) (2)
(B)-(IV) (3)
(C)-(I) (4)
(D)-(II)
Match List-I with List-II : $\begin{array}{|c|c|c|c|}
\hline & \text { List-I } & & \text { List-II } \
\hline \text { (A) } & \text { A force that restores an elastic body of unit area to its original state } & \text { (I) } & \text { Bulk modulus } \
\hline \text { (B) } & \text { Two equal and opposite forces parallel to opposite faces } & \text { (II) } & \text { Young's modulus } \
\hline \text { (C) } & \begin{array}{l}
\text { Forces perpendicular everywhere to the surface per unit area } \
\text { same everywhere }
\end{array} & \text { (III) } & \text { Stress } \
\hline \text { (D) } & \text { Two equal and opposite forces perpendicular to opposite faces } & \text { (IV) } & \text { Shear modulus } \
\hline
\end{array}$ Choose the correct answer from the options given below :
Held on 5 Apr 2024 · Verified 6 Jul 2026.
(A)-(IV), (B)-(II), (C)-(III), (D)-(I)
(A)-(III), (B)-(IV), (C)-(I), (D)-(II)
(A)-(II), (B)-(IV), (C)-(I), (D)-(III)
(A)-(III), (B)-(I), (C)-(II), (D)-(IV)
Sign in to track your attempts and accuracy.
Sign in to keep a private note on this question. Nothing you write is ever public.
Net gravitational force at the center of a square is found to be $F_{1}$ when four particles having mass $M, 2 M, 3 M$ and $4 M$ are placed at the four corners of the square as shown in figure and it is $F_{2}$ when the positions of $3 M$ and $4 M$ are interchanged. The ratio $\frac{F_{1}}{F_{2}}$ is $\frac{\alpha}{\sqrt{5}}$. The value of $\alpha$ is $\_\_\_\_$. 
A particle of mass 2 kg is projected vertically upward with a speed of 30 m/s. The maximum height reached by the particle is (g = 10 m/s²):
Two projectiles are projected with the same initial velocities at the $15^\circ$ and $30^\circ$ with respect to the horizontal. The ratio of their ranges is $1:x$. The value of $x$ is:
In an experiment the values of two spring constants were measured as $k_{1}=(10 \pm 0.2) \mathrm{N} / \mathrm{m}$ and $k_{2}=(20 \pm 0.3) \mathrm{N} / \mathrm{m}$. If these springs are connected in parallel, then the percentage error in equivalent spring constant is :
The surface tension of a soap solution is $3.5 \times 10^{-2}$ N/m. The work required to increase the radius of a soap bubble from $1$ cm to $2$ cm is $\alpha \times 10^{-6}$ J. The value of $\alpha$ is _____. ($\pi = 22/7$)
Work through every JEE Main Mechanics PYQ, year by year.