| Torque =Force×perpendicular distance(r⊥) | Nm |
| Stress=AreaForce | Nm−2 |
| Latent heat =MassEnergy | Jkg−1 |
| Power =TimeWork=TimeForce×displacement | Nms−1 |
Match List I with List II.
| List I | List II | ||
| (A) | Torque | (I) | Nms−1 |
| (B) | Stress | (II) | Jkg−1 |
| (C) | Latent Heat | (III) | Nm |
| (D) | Power | (IV) | Nm−2 |
Held on 29 Jul 2022 · Verified 6 Jul 2026.
A−III,B−II,C−I,D−IV
A−III,B−IV,C−II,D−I
A−IV,B−I,C−III,D−II
A−II,B−III,C−I,D−IV
Sign in to track your attempts and accuracy.
Sign in to keep a private note on this question. Nothing you write is ever public.
Net gravitational force at the center of a square is found to be $F_{1}$ when four particles having mass $M, 2 M, 3 M$ and $4 M$ are placed at the four corners of the square as shown in figure and it is $F_{2}$ when the positions of $3 M$ and $4 M$ are interchanged. The ratio $\frac{F_{1}}{F_{2}}$ is $\frac{\alpha}{\sqrt{5}}$. The value of $\alpha$ is $\_\_\_\_$. 
A particle of mass 2 kg is projected vertically upward with a speed of 30 m/s. The maximum height reached by the particle is (g = 10 m/s²):
Two projectiles are projected with the same initial velocities at the $15^\circ$ and $30^\circ$ with respect to the horizontal. The ratio of their ranges is $1:x$. The value of $x$ is:
In an experiment the values of two spring constants were measured as $k_{1}=(10 \pm 0.2) \mathrm{N} / \mathrm{m}$ and $k_{2}=(20 \pm 0.3) \mathrm{N} / \mathrm{m}$. If these springs are connected in parallel, then the percentage error in equivalent spring constant is :
The surface tension of a soap solution is $3.5 \times 10^{-2}$ N/m. The work required to increase the radius of a soap bubble from $1$ cm to $2$ cm is $\alpha \times 10^{-6}$ J. The value of $\alpha$ is _____. ($\pi = 22/7$)
Work through every JEE Main Mechanics PYQ, year by year.