The dimension of magnetic induction is, MT−2A−1, the dimension of magnetic flux is, ϕ=B⋅A⇒[ϕ]=ML2T−2A−1, the dimension of magnetic permeability, MLT−2A−2 and, the dimension of magnetization, M0L−1A.
Match List - I with List - II :
| List - I | List - II | ||
| a | Magnetic induction | i | ML2T−2A−1 |
| b | Magnetic flux | ii | M0L−1A |
| c | Magnetic permeability | iii | MT−2A−1 |
| d | Magnetization | iv | MLT−2A−2 |
Held on 26 Aug 2021 · Verified 6 Jul 2026.
(a)−(iii),(b)−(ii),(c)−(iv),(d)−(i)
(a)−(iii),(b)−(i),(c)−(iv),(d)−(ii)
(a)−(ii),(b)−(iv),(c)−(i),(d)−(iii)
(a)−(ii),(b)−(i),(c)−(iv),(d)−(iii)
Sign in to track your attempts and accuracy.
Sign in to keep a private note on this question. Nothing you write is ever public.
Net gravitational force at the center of a square is found to be $F_{1}$ when four particles having mass $M, 2 M, 3 M$ and $4 M$ are placed at the four corners of the square as shown in figure and it is $F_{2}$ when the positions of $3 M$ and $4 M$ are interchanged. The ratio $\frac{F_{1}}{F_{2}}$ is $\frac{\alpha}{\sqrt{5}}$. The value of $\alpha$ is $\_\_\_\_$. 
A particle of mass 2 kg is projected vertically upward with a speed of 30 m/s. The maximum height reached by the particle is (g = 10 m/s²):
Two projectiles are projected with the same initial velocities at the $15^\circ$ and $30^\circ$ with respect to the horizontal. The ratio of their ranges is $1:x$. The value of $x$ is:
In an experiment the values of two spring constants were measured as $k_{1}=(10 \pm 0.2) \mathrm{N} / \mathrm{m}$ and $k_{2}=(20 \pm 0.3) \mathrm{N} / \mathrm{m}$. If these springs are connected in parallel, then the percentage error in equivalent spring constant is :
The surface tension of a soap solution is $3.5 \times 10^{-2}$ N/m. The work required to increase the radius of a soap bubble from $1$ cm to $2$ cm is $\alpha \times 10^{-6}$ J. The value of $\alpha$ is _____. ($\pi = 22/7$)
Work through every JEE Main Mechanics PYQ, year by year.