
Mg1−(RR−a)2
FR>MgcosθR
F>Mgcosθ
F>MgRR2−(R−a)2.
⇒Mg1−(RR−a)2
A uniform cylinder of mass M and radius R is to be pulled over a step of height a (a<R) by applying a force F at its centre ′O′ perpendicular to the plane through the axes of the cylinder on the edge of the step (see figure). The minimum value of F required is :

Held on 2 Sept 2020 · Verified 6 Jul 2026.
Mg1−(RR−a)2
Mg(R−aR)2−1
MgRa
Mg1−R2a2
Sign in to track your attempts and accuracy.
Sign in to keep a private note on this question. Nothing you write is ever public.
Net gravitational force at the center of a square is found to be $F_{1}$ when four particles having mass $M, 2 M, 3 M$ and $4 M$ are placed at the four corners of the square as shown in figure and it is $F_{2}$ when the positions of $3 M$ and $4 M$ are interchanged. The ratio $\frac{F_{1}}{F_{2}}$ is $\frac{\alpha}{\sqrt{5}}$. The value of $\alpha$ is $\_\_\_\_$. 
A particle of mass 2 kg is projected vertically upward with a speed of 30 m/s. The maximum height reached by the particle is (g = 10 m/s²):
Two projectiles are projected with the same initial velocities at the $15^\circ$ and $30^\circ$ with respect to the horizontal. The ratio of their ranges is $1:x$. The value of $x$ is:
In an experiment the values of two spring constants were measured as $k_{1}=(10 \pm 0.2) \mathrm{N} / \mathrm{m}$ and $k_{2}=(20 \pm 0.3) \mathrm{N} / \mathrm{m}$. If these springs are connected in parallel, then the percentage error in equivalent spring constant is :
The surface tension of a soap solution is $3.5 \times 10^{-2}$ N/m. The work required to increase the radius of a soap bubble from $1$ cm to $2$ cm is $\alpha \times 10^{-6}$ J. The value of $\alpha$ is _____. ($\pi = 22/7$)
Work through every JEE Main Mechanics PYQ, year by year.