The velocity is maximum at the narrows part of the pipe and pressure is maximum at the widest part of the pipe. (Using equation of continuity AV= constant.) And Bernoulli's theorem P+21ρV2= constant
A fluid is in streamline flow across a horizontal pipe of variable area of cross section. For this which of the following statements is correct?
Held on 30 Apr 2013 · Verified 9 Jul 2026.
The velocity is maximum at the narrowed part of the pipe and pressure is a maximum at the widest part of the pipe.
Velocity and pressure both are maximum at the narrowest part of the pipe.
Velocity and pressure both are maximum at the widest part of the pipe
The velocity is minimum at the narrowest part of the pipe and the pressure is minimum at the widest part of the pipe.
Sign in to track your attempts and accuracy.
Sign in to keep a private note on this question. Nothing you write is ever public.
A bullet of mass 10 g moving with 400 m/s penetrates a wall and comes to rest. The loss in kinetic energy is:
Two cities X and Y are connected by a regular bus service with a bus leaving in either direction every T min. A girl is driving scooty with a speed of 60 $\mathrm{km} / \mathrm{h}$ in the direction X to Y notices that a bus goes past her every 30 minutes in the direction of her motion, and every 10 minutes in the opposite direction. Choose the correct option for the period T of the bus service and the speed (assumed constant) of the buses.
A uniform rod of mass 20 kg and length 5 m leans against a smooth vertical wall making an angle of $60^{\circ}$ with it. The other end rests on a rough horizontal floor. The friction force that the floor exerts on the rod is (take $\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2$ )
The kinetic energies of two similar cars $A$ and $B$ are 100 J and 225 J respectively. On applying breaks, car A stops after 1000 m and car B stops after 1500 m . If $\mathrm{F}_{\mathrm{A}}$ and $\mathrm{F}_{\mathrm{B}}$ are the forces applied by the breaks on cars A and B , respectively, then the ratio $\mathrm{F}_{\mathrm{A}} / \mathrm{F}_{\mathrm{B}}$ is :
A balloon is made of a material of surface tension $S$ and its inflation outlet (from where gas is filled in it) has small area $A$. It is filled with a gas of density $\rho$ and takes a spherical shape of radius $R$. When the gas is allowed to flow freely out of it, its radius changes from $R$ to 0 (zero) in time $T$. If the speed $\eta(r)$ of gas coming out of the balloon depends on $r$ as $r^\alpha$ and $T \propto S^\alpha A^\beta \rho^\gamma R^\delta$ then
Work through every NEET UG Mechanics PYQ, year by year.