E=λhCP=λh⇒P=CE
Initial momentum of light when falls on a perfectly reflecting surface.
Pi=CE
When it is reflected momentum is in opposite direction
Pf=−CE
Net momentum =Pf−Pi
=−CE−CE
=−C2E
ΔP=C2E
A radiation of energy E falls normally on a perfectly reflecting surface. The momentum transferred to the surface is (C = Velocity of light)
Held on 30 Apr 2015 · Verified 9 Jul 2026.
CE
C2E
C22E
C2E
Sign in to track your attempts and accuracy.
Sign in to keep a private note on this question. Nothing you write is ever public.
Two point charges +2μC and -2μC are placed 10 cm apart. The electric field at the midpoint is:
A constant voltage of 50 V is maintained between the points A and B of the circuit shown in the figure. The current through the branch CD of the circuit is :- 
The electric potential at distance r from a point charge q is V = q/(4πε₀r). The electric field E is:
To an ac power supply of 220 V at 50 Hz , a resistor of $20 \Omega$, a capacitor of reactance $25 \Omega$ and an inductor of reactance $45 \Omega$ are connected is series. The corresponding current in the circuit and the phase angle between the current and the voltage is, respectively-
A wire of resistance R is cut into 8 equal pieces. From these pieces two equivalent resistances are made by adding four of these together in parallel. Then these two sets are added in series. The net effective resistance of the combination is :
Work through every NEET UG Electromagnetism PYQ, year by year.