The density of material in CGS system of units is 4 ~g / cm^3. In a system of units in which unit of lengths is 10 ~cm and unit of mass is 100 ~g,…

A bullet of mass 10 g moving with 400 m/s penetrates a wall and comes to rest. The loss in kinetic energy is:

Consider a water tank shown in the figure. It has one wall at $x=L$ and can be taken to be very wide in the $z$ direction. When filled with a liquid of surface tension $S$ and density $\rho$, the liquid surface makes angle $\theta_0\left(\theta_0 \ll 1\right)$ with the $x$-axis at $x=L$. If $y(x)$ is the height of the surface then the equation for $y(x)$ is:  $\left(\operatorname{take} \theta(x)=\sin \theta(x)=\tan \theta(x)=\frac{d y}{d x}, g\right.$ is the acceleration due to gravity)

A physical quantity $P$ is related to four observations $a, b, c$ and $d$ as follows : $P=a^3 b^2 / c \sqrt{d}$ The percentage errors of measurement in $a, b, c$ and $d$ are $1 \%, 3 \%, 2 \%$ and $4 \%$ respectively. The percentage error in the quantity $P$ is

A uniform rod of mass 20 kg and length 5 m leans against a smooth vertical wall making an angle of $60^{\circ}$ with it. The other end rests on a rough horizontal floor. The friction force that the floor exerts on the rod is (take $\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2$ )

The kinetic energies of two similar cars $A$ and $B$ are 100 J and 225 J respectively. On applying breaks, car A stops after 1000 m and car B stops after 1500 m . If $\mathrm{F}_{\mathrm{A}}$ and $\mathrm{F}_{\mathrm{B}}$ are the forces applied by the breaks on cars A and B , respectively, then the ratio $\mathrm{F}_{\mathrm{A}} / \mathrm{F}_{\mathrm{B}}$ is :